Sioux Falls Electrical Cost Calculator

Pick the electrical job you are pricing. You will see a rough low, typical, and high price from published national guides. Your final price comes after an electrician sees the job.

Rough range for a 100 to 200 amp panel upgrade: about $1,300 to $2,000. Typical: about $1,600. Meter base or service wire work adds more. This is a typical published national range, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.

The full table below lists every job, including when JavaScript is off.

How to use this calculator

Pick the electrical job you are pricing, choose the one option if asked, and you will see a rough low, typical, and high price. The numbers come from published national cost guides (Angi, updated in 2026) and are rounded on purpose. Use them for budgeting. Your final price comes after an electrician sees the panel, the wiring, and the route.

Where a guide publishes an average, the result shows that figure as typical. Where it does not, the result says most pay about the low and high figures. A meter base, a long trench, plaster walls, or a panel that is too small can move a job above the range. Emergency calls and interlock kits are not in this tool, because no sourced price is published for them.

Why electrical prices vary in Sioux Falls

  • The age of the home. Houses in older Sioux Falls neighborhoods are more likely to have fuse boxes, small services, cloth or knob and tube wiring, and plaster walls. Each of those adds time.
  • The service size you need. Adding an EV charger, heat pump, hot tub, or shop can push a 100 amp service to its limit. Sometimes the fix is a new panel. Sometimes it is a larger service with a new meter base.
  • Distance and access. A charger next to the panel in the garage is quick. A hot tub 80 feet across the yard needs a trench. Finished basements hide wiring behind drywall.
  • Weather. Trenching frozen ground is slower, and generator pads and gas lines are easier before winter.
  • Permits and inspections. Panel changes, generators, and new 240 volt circuits usually need a permit, which is part of doing the job right.

What the ranges include and leave out

Published ranges generally include the equipment and the labor to install it. They do not know your house. A meter base, a subpanel, drywall patching, or a long trench can push a job higher. That is why we look first and give you the price before work starts.

Upgrade now or later?

If you are planning several electrical projects, like an EV charger this year and a hot tub next year, it is often cheaper to size the panel once. Tell us everything you plan to add so the new panel has room.

Safety first

If a panel is hot, buzzing, or smells burnt, skip the calculator and call (605) 250-4838. Call 911 if you see smoke or fire.

Get a real number

Call (605) 250-4838 any time or send the form with your calculator result and a photo of the panel label.

Typical published price ranges

Typical published national price ranges for common electrical jobs
JobOptionLowTypicalHighNote
Job100 to 200 amp panel upgradeLow$1,300Typical$1,600High$2,000NoteMeter base or service wire work adds more
JobFederal Pacific or other old panel replacementLow$600Typical$1,300High$2,100
JobFuse box to breaker panelLow$1,500TypicalNot publishedHigh$2,000
JobWhole house rewireOptionabout 1,000 sq ftLow$2,000TypicalNot publishedHigh$4,000NoteOlder plaster homes run higher
JobWhole house rewireOptionabout 1,500 sq ftLow$3,000TypicalNot publishedHigh$6,000NoteOlder plaster homes run higher
JobWhole house rewireOptionabout 2,000 sq ftLow$4,000TypicalNot publishedHigh$8,000NoteOlder plaster homes run higher
JobWhole house rewireOptionabout 2,500 sq ftLow$5,000TypicalNot publishedHigh$10,000NoteOlder plaster homes run higher
JobWhole house rewireOptionabout 3,000 sq ftLow$6,000TypicalNot publishedHigh$12,000NoteOlder plaster homes run higher
JobKnob and tube replacementOptionabout 1,000 sq ftLow$10,000TypicalNot publishedHigh$20,000
JobKnob and tube replacementOptionabout 1,300 sq ftLow$13,000TypicalNot publishedHigh$26,000
JobKnob and tube replacementOptionabout 1,600 sq ftLow$16,000TypicalNot publishedHigh$32,000
JobKnob and tube replacementOptionabout 2,000 sq ftLow$20,000TypicalNot publishedHigh$40,000
JobStandby generator (unit cost by size)Option14 to 18 kWLow$4,000TypicalNot publishedHigh$5,500NoteInstallation, pad, transfer switch and permit add more
JobStandby generator (unit cost by size)Option20 to 24 kWLow$5,000TypicalNot publishedHigh$6,500NoteInstallation, pad, transfer switch and permit add more
JobStandby generator (unit cost by size)Option26 to 32 kWLow$6,500TypicalNot publishedHigh$15,000NoteInstallation, pad, transfer switch and permit add more
JobTransfer switch, installedOptionmanualLow$400TypicalNot publishedHigh$1,300
JobTransfer switch, installedOptionautomaticLow$600TypicalNot publishedHigh$2,500
JobLevel 2 EV chargerOptionI have the chargerLow$600Typical$1,000High$1,400NotePanel upgrade adds more if needed
JobLevel 2 EV chargerOptionInclude the chargerLow$700TypicalNot publishedHigh$2,000NotePanel upgrade adds more if needed
JobHot tub wiringLow$1,900Typical$2,300High$4,200

Typical published national ranges, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.

  • 100 to 200 amp panel upgrade, Fuse box to breaker panel. Source: Angi, electrical panel upgrade cost, updated Oct 29, 2026
  • Federal Pacific or other old panel replacement. Source: Angi, Federal Pacific breakers, updated Jul 9, 2026
  • Whole house rewire. Source: Angi, cost to rewire a house, updated Oct 13, 2026
  • Knob and tube replacement. Source: Angi, knob and tube wiring replacement cost, updated Oct 29, 2026
  • Standby generator (unit cost by size). Source: Angi, whole house generator cost, updated Sep 1, 2026
  • Transfer switch, installed. Source: Angi, generator transfer switch cost, updated Oct 16, 2026
  • Level 2 EV charger. Source: Angi, EV charging installation costs, updated Sep 23, 2026
  • Hot tub wiring. Source: Angi, hot tub wiring cost, updated Oct 13, 2026

Get my quote

Send the job and the range you saw. A local electrician will call you about the real price. This form goes to service@siouxfalls-electrician.com.

Prefer to talk? Call (605) 250-4838

Questions about these ranges

Are these electrician prices for Sioux Falls specifically?

No. They are typical published national ranges from Angi, rounded. Local prices can be higher or lower. Your final price comes after an electrician sees the job.

How much does an electrician charge to upgrade to 200 amps?

Published national figures put a 200 amp panel with installation at about $1,300 to $2,000, more if the meter base and service wires also need replacing.

How much does a whole house generator cost?

Published national figures put whole house generator installation at about $1,500 to $8,800, with an average near $5,200. Size and fuel matter most.

Is the calculator free?

Yes, no sign up. Send the form or call for a real quote.

Call (605) 250-4838Email