
Sioux Falls and nearby towns
Panel Upgrades Sioux Falls SD
Full, warm, or fuse-box panels replaced.
A panel upgrade in Sioux Falls replaces a full or outdated breaker panel, including an old fuse box, when you need more capacity or open breaker spaces. A failed breaker or a damaged panel is a repair, not this upgrade. The new panel has to match the service and the loads you plan to add. The mast and meter are checked when a service change might be involved. Call (605) 250-4838.
Updated
What’s included
Panel work is planned. It is not the same visit as repairing a failed breaker or a damaged panel.
Replacement of a panel that has no open breaker spaces. A full panel cannot safely take another circuit.
Replacement of a fuse box with a breaker panel. We match the new panel to your service and to what you want to run.
Panels that are warm, rusted, or buzzing. We look at the heat or the buzzing before we set the upgrade. If the service size can stay, that visit is a repair.
Service changes coordinated with the utility when the meter or mast has to move. If the power company has to move the meter, we line that up before we swap the panel.
Labeling of circuits after the new panel is on. You get a copy of the new directory.
Room for a later EV charger, shop, or addition when you say that is the goal. Tell us, and we will leave space for it.
Stab-Lok panel replacement when that is the panel you have. The new panel is sized to the service and to the loads you plan to add, the same way as any other panel upgrade.
Signs you need a panel upgrade
These are the usual reasons we replace the panel, not just one device. A photo of the panel door helps us on the call.
Every breaker space is full and you still need a circuit. A skinny tandem breaker does not fit every panel.
You still have fuses and want breakers. We match the new panel to your service.
Breakers trip when two ordinary appliances run. Your panel or that circuit may be too small for them.
The panel cover is hot or shows scorch marks. Leave the cover on and call us.
An insurer or a buyer asked about the age and type of the panel. A photo of the label helps us on the call.
What affects panel upgrade cost
What you pay depends on how hard the wires are to reach, the parts, and whether your city wants a permit. We do not list one price here. Typical published national ranges are shown below as a rough guide only.
- 1
The price moves with the panel size, whether the mast and meter stay, how far the new panel sits from the old one, and whether the city requires a permit and inspection.
- 2
A panel in a finished wall or a tight closet takes more labor than one in an open utility room.
24/7 emergency service
A buzzing or hot panel is urgent even if the upgrade itself is scheduled. Call if the panel is hot, and call 911 if you see smoke.
Calls answered 24 hours a day, 7 days a week, including emergency service.
How much does a 100 amp to 200 amp upgrade cost?
Published national figures put a 200 amp panel with installation at about $1,300 to $2,000, and the average electrical panel upgrade near $1,600. Going from 100 to 200 amps usually means more than the panel: the meter base and the service wires coming into the house have to be rated for 200 amps too, and that work adds to the total.
| Scope | Typical published range |
|---|---|
| Scope200 amp panel, installed | Typical published range$1,300 to $2,000 |
| ScopeAverage panel upgrade | Typical published rangeabout $1,600 |
| ScopeMeter box install or replacement, if needed | Typical published range$200 to $800 |
| ScopePermit (varies by city) | Typical published range$50 to $300 |
Typical published national ranges, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.
Source: Angi, electrical panel upgrade cost, updated Oct 29, 2026
Why people move to 200 amps
An EV charger, a heat pump, a hot tub, a shop, or an addition can push a 100 amp service past what it can safely carry. A load review decides whether you need a bigger service or just a new panel at the same size.
The utility side
When the meter or service drop has to change, the power company has to disconnect and reconnect. We line that up before the swap.
Permit and inspection
The existing question [Who inspects a panel change?](#faq-who-inspects-a-panel-change) already covers this.
Federal Pacific panel replacement cost
Federal Pacific Electric (FPE) panels with Stab-Lok breakers were installed in many homes built from about 1950 to 1990. Testing has found that a share of Stab-Lok breakers can fail to trip, and some insurers and home inspectors flag these panels. Published national figures put replacing a breaker panel like an FPE at about $550 to $2,100, with an average near $1,300.
Typical published national ranges, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.
Source: Angi, Federal Pacific breakers, updated Jul 9, 2026
How to tell if you have one
Look for "Federal Pacific" or "FPE" on the panel cover and "Stab-Lok" on the label inside the door. The breakers often have a red strip on the handles. Send us a photo with the cover closed.
Other older panels
If an inspector, buyer, or insurer asks about any older panel brand, send us a photo of the label. Published national figures put general panel replacement at about $500 to $2,200, and up to $4,500 for complex jobs.
Typical published national ranges, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.
Source: Angi, cost to replace a circuit breaker box, updated Oct 22, 2026
Fuse box replacement cost
Published national figures put replacing a fuse box with a breaker panel at about $1,500 to $2,000. If the home is also moving to a larger service, the 200 amp figures above apply.
Typical published national ranges, not a quote. Rough estimate only. Your final price comes after an electrician sees the job.
Source: Angi, electrical panel upgrade cost, updated Oct 29, 2026
Why fuse boxes come up at sale time
Home inspectors and insurers often ask about fuse panels, and a buyer may ask for a credit or a replacement. A replacement panel also gives you room to add circuits.
Older wiring behind the fuses
Homes still on fuses often have older wiring too. We note what we see so you can plan, and the next step may be wiring and rewiring.
How the visit goes
Tell us what is wrong, and we stick to that. If we find a second problem, we tell you before we keep going.
- 1
You call
The visit starts with the cover off when that is safe, plus a list of loads you want to keep or add. The mast and the meter are photographed when a service change might be involved. The notes name the panel size, whether the utility has to move anything, and whether a permit is part of the job.
- 2
On site
Power is off for the swap. Circuits are landed and labeled before the cover goes back. You keep a copy of the directory.
- 3
The work
Space for a later charger or shop circuit is noted only if you asked for it.
Towns served
This work is available in Sioux Falls, Brandon, Harrisburg, Tea, Hartford, Dell Rapids, Canton, and Lennox. See the service area.
Related services
These are the jobs that often come up next. Open a card to see what that visit covers.

Circuit breaker and panel repair
Breakers that trip, and panels that are hot, rusted, or damaged. A capacity upgrade is a different visit.
Learn more →
EV charger installation
Level 2 home chargers and the circuit that feeds them. We check your panel for space before we mount the charger.
Learn more →
Wiring and rewiring
Old wiring, added circuits, and rewires for one room or a whole house. We tell you which wires we keep and which ones we replace.
Learn more →
Surge protection
Whole-house surge protection installed at the panel. A plug-in strip only covers what you plug into it.
Learn more →
Questions about this work
Does a panel upgrade always mean a larger service?
No. Some homes need a new panel at the same service size because the old one is full or unsafe. A larger service, such as a 200-amp panel upgrade, is a separate decision based on the loads you list.
Can you add circuits without replacing the panel?
Only when there is space and the panel is in sound condition. Tandem breakers are not a fit for every panel. The visit says which path is real.
Who inspects a panel change?
Inside Sioux Falls, the city has its own inspection path. Other towns follow that city plus the state electrical inspection rules. The visit notes what the job needs.
How should I prepare for a panel visit?
Send a photo of the panel with the cover closed and another with it open if you can do that safely. List any large loads you plan to add.
How much does it cost to upgrade from 100 amp to 200 amp service?
Published national figures put a 200 amp panel with installation at about $1,300 to $2,000. If the meter base and service wires also need to be replaced, the total is higher. We confirm the scope after looking at the panel, meter, and loads you want to add.
How much does it cost to replace a Federal Pacific panel?
Published national figures put replacing a panel like a Federal Pacific Stab-Lok at about $550 to $2,100, with an average near $1,300. The size of the new panel and its location set the price.
Should I replace my Federal Pacific panel even if it works?
Many electricians recommend it. Testing has shown that some Stab-Lok breakers fail to trip when they should, and a breaker that does not trip cannot protect the circuit. Some insurers and inspectors also ask about these panels.
How much does it cost to replace a fuse box?
Published national figures put replacing a fuse box with a breaker panel at about $1,500 to $2,000, more if the service size also goes up.
Do I need 200 amp service?
Not always. A home adding an EV charger, heat pump, hot tub, or shop often does. Our generator and cost tools give a rough start, and a load review on site gives the real answer.

Need help with a panel upgrade?
Calls answered 24 hours a day, 7 days a week, including emergency service. Tell us if it is your house or your business.